Infinite Menus Place Holder (Dreamweaver Design View)

A) Ferro Alloys

S.No.	Item Description	Qty.	Basic Rate	Excise Duty	Tax	FOR
1.	Ferro Silicon -70-75% Si-70-75%, Al-1.25%Max, S-0.05% Max, C-0.15% Max P-0.05% Max. Size-25-150mm	12 MT
2.	Ferro Manganese H.C Mn-70-75%, Si-1.5% Max C-6-8%, P-0.4% Max, S-0.05% Max,Size-25 -150 MM	5 MT
3.	Ferro Chrome H.C Cr-60% ,Si-4% Max,C-6-8% S-0.05% Max,P-0.05% Max. Size: 25 To 150 mm	3 MT
4.	Ferro Chrome L.C Cr-65%,C-0.1% Max, Si-1.5% Max, P-0.03% Max S-0.03% Max,Size-25-150 mm	1 MT
5.	Ferro Silicon Magnesium Mg-5-7%, Si-43-48%, Al-1.2%Max., Re-0.8-1.2%Max Ca-0.8-1.2%, Size:15-25 mm
6.	Silico Manganese Mn-60-65%, Si-14% Min, C- 2.5% Max, P-0.35% Max, S- 0.05% max, Size-25-150 mm`	1 MT
7.	Ferro Molybdenum Mo-60% Min, Si-1.5% Max C-0.5%Max, S-0.6% Max, P- 0.1% Max, Cu-0.5% Max	200 kg
8.	Pure Nickel -99.9% Size: 4" X 4"	500 Kg
9.	Nickel Magnesium Ni-75-80%, Mg-15%	200 kg
10.	Calcium Carbide Form - Lumps	500 Kg
11.	Inoculent Size: 3 to 6 mm Ba-2-3%,Ca-1-1.5%, Al-1-1.5% Si-70-75%	1 MT
12.	Inoculent Size: 0.5 to 0.7 mm Ba-2-3%,Ca-1-1.5%, Al-1-1.5% Si-70-75%	1 MT

B) Raw Material

S.No.	Item Description	Qty.	Basic Rate	Excise Duty	Tax	FOR
1.	Pig Iron Steel Grade C-3.5-4.2%, Mn-0.5 -1% Si-1-1.5% Max. S-0.05% ,P-0.02%	1000 MT
2.	Sponge iron Fe-91% Min, metallic Iron-82% Metalization-89%,C-0.1%Max S&P-0.05% Max,Size-3 -20 mm	10 MT
3.	Heavy Melting Scrap Structural End Cutting C-Upto 0.5% Max,Si-0.5% max S & P Less Then 0.05%	100 MT
4.	CRCA Side Trimming Scrap Size: 9" X 9" Mn-0.3% Min,P-0.02%Max Si-0.2% Max, S-0.02% Max C-0.2%,Cr-0.05%	50 MT
5.	Bentonite Powder Gel Insex-75-80Min Swelling Index-25 Min PH value -2% Suspension -8-10 % Passing Through ASTM-100 Dry-95% Min	30 MT
6.	Silica Sand Sio2-98% Min, Feo-1% max, Cao+Mgo-1% Max Alkalies-0.5% Max,Clay-0.5%Max	200 MT
7.	Low Ash Metallurgical Coke FC-78% +/-2%,Ash Content-20%+/-2%, V.M-3%Max, Moisture-8% +/-2% Size-75-200 mm	50 MT
8.	Fire Clay Powder Al2o3-28 to 30% Mesh-200	20 MT
9.	Acidic Ramming Mass. Sio2-98% Min, Size- Upto 5 mm	10 MT
10.	Graphite Fine Fixed Carbon-98% Min Size-1 - 5mm	07 MT
11.	Lime Stone Cao-48% Min, MgO -2% Max SiO2-2.5% Max Size- 25 mm to 100 mm	30 MT
12.	Yellow Dextrin Ash Content -01% Max Insoluble in Water -5% max Mesh Size-To Pass Through B.S. Sieve200	1 MT
13.	Sodium Silicate Total Soluble SiO2-27-32% Max Total Alkalinity -12 -15 % Max Mass Ratio-2.1-2.55% Max Specific Gravity-51-52 Deg. Baume	1 MT

C) Foundry Fluxes & Chemicals

S.No.	Item Description	Qty.	Basic Rate	Excise Duty	Tax	FOR
1.	Foundry Thinner	500 Ltr.
2.	Zircon Paint Water Base ZrO2-60% Min, Boum-80-85%	2 MT
3.	Zircon Paint Alcohol Base	1 MT
4.	No-Bake Binder Part-A Linseed Based	14 MT
5.	No-Bake Binder Part-B Catalyst,Linseed based	700 Kg
6.	No-Bake Binder Part-C Catalyst,Linseed based	2.8MT
7.	Zircon Graphite Paint Water Base Zr + Graphite + Water	1 MT
8.	Zircon Graphite Paint Thinner base Zr + Graphite + Thinner	500 Kg
9.	Coil Cote	50 Kg
10.	Chill Cote	10 Kg
11.	Molasis Bench Life-40 Minutes Dry Shear Strenghth-18 PSI Dry Compression Strength -200 PSI Dry Tensile Strength -18 PSI Scratch hardness-60 Number/Minute Stripping Time -3-4 Hour	30 MT

D) Refractories & Foundry Sleeve

S.No.	Item Description	Qty.	Basic Rate	Excise Duty	Tax	FOR
1.	Cupola Bricks -9"X4 ½"X3"X2.5" As per IS-8	5000
2.	Laddle Bricks -9"X4 ½"X1" As Per IS-8	2000
3.	Laddle Bricks -9"X4 ½"X1.5" As Per IS-8	2000
4.	Pipe Bricks-50 X 300, 60 X 300 70 X 300, 70 X 225,90 X 300, 90 X 225 As per IS-8	1000 Nos Each
5.	Exothermic Sleeve-4" X 6", 3 X 6" 5" X 6", 7"X6" , 8"X6",10" x 6" 12" x 6" 1.5 E.M.F	500 Nos Each
6.	Insulating Sleeve- 4" X 6", 5" X6", 6" X 6", 7" X6" , 8" X6"	200 Nos each

E) Welding Electrodes & Accessories

S.No.	Item Description	Qty.	Basic Rate	Excise Duty	Tax	FOR
1.	M.S. Welding Electrode-3.15mm, 4mm,5mm ,Gr-6013	700 Pack
2.	L.H Welding Electrode-3.15mm, 4mm,5mm ,Gr-7018	400Pack
3.	Co2 Wire ,Mig Wire-1.2mm,	1 MT
4.	Welding Electrode 4mm, 4220 (Xupper) L&T	10 KG
5.	C.I. Electrode Machinable/Non Machinable.	20 KG
6.	Welding Holder 600A	50 Nos
7.	Welding Copper Cable -95 Sq. mm	50 Mtr
8.	Welding Alu. Cable -120 Sq.mm	200 Mtr
9.	Nozzle B-1/16", B-3/32", B-3/64"	50 Nos
10.	Lather Hand Glove	20 Nos
11.	Safety Goggle	50 Nos
12.	Welding Het	20 Nos
13.	Leather Appron	10 Nos

F) Bearing & Mechanical Items

S.No.	Item Description	Qty.	Basic Rate	Excise Duty	Tax	FOR
1.	Bearing 6201zz	50
2.	Bearing 6203zz	50
3.	Bearing 6202zz	20
4.	Bearing 6200zz	30
5.	Bearing 6005	10
6.	Ball Bearing 3204	30
7.	Ball Bearing 6206	5
8.	Ball Bearing 6208	5
9.	Ball Bearing 6212	5
10.	Ball Bearing 32209	5
11.	T/R Bearing 32210	5
12.	T/R Bearing 32211	5
13.	T/R Bearing 32212	5
14.	Bearing 51207	5
15.	Bearing 51208	5
16.	Bearing 51109	5
17.	Bearing 51312	5

G) Electrical Items

S.No.	Item Description	Qty.	Basic Rate	Excise Duty	Tax	FOR
1.	MCCB- 100 A, 200 A, 400 A
2.	Contactor ,Relay & Spares
3.	PVC Flexible Copper Cable 1.5 Sq.mm X 1 Core 2.5 Sq.mm X 1 Core 1.5 Sq.mm X 2 Core 2.5 Sq.mm X 2 Core 2.5 Sq.mm X 3 Core 4 Sq.mm X 4 Core